All bases and plate supports of the base are made of galvanized steel.
- Height of base to ensure the system of floor height to complete floor is 230-330-430 -530 - 730mm.
- Load bearing capacity of vertical stand: 2722 Kg without deformation. In addition, the stand can be adjusted and fixed to the mounting height and anti-vibration by threaded system and screw at the stand.
- Size of pipe: diameter: 25mm, 1.5mm thick steel
- Stand base is made from steel, synchronized with the base.
size 100mm x 100mm x 2.5mm and installation of support columns designed to match the base of the base, make sure to secure the floor plate according to the manufacturer's technical documents.
- The base of the base is made from steel, synchronized with the base size 76mm x 76mm x 3mm.
The base of the base has a support column designed to match the base of the base. Full thread and screw thread size M22. In order to create a tripod system with the ability to adjust the vertical height increase and decrease by 20mm.
- First pad insole appropriate to set the slab and support systems horizontal bar directly to the first tank to
horizontal bar
- flooring system used type rungs bolted recommended by the NEC (National Electrial Code)
- The system of horizontal bars Made of steel, synchronized with the stand. Designed and fabricated to connect the base of the base - and form a network of floor panels.
- The horizontal bar is connected to the base of the base by bolts
* Specification
• Common size: 600 x600 x 35mm. The average weight is 13.5kg / sheet
• The normal finishing height is usually from 100-400mm (other sizes can still meet the requirements).
* Relevant specifications:
The floor plate surface is made of HPL or vinyl, meeting the resistance test specifications to ensure electrical safety and providing sufficient electrical conductivity to minimize Charge capacity: 10 6 ~ 10 8 ohm.
- HPL / Vinyl surface is resistant to fire, scratch, abrasion and anti-static.
- HPL / Vinyl surfaces and floor panels are resistant to moving heavy objects with wheels, breakage, cracking.
Load
bearing (rolling Load): 3,556 KN / inch2 - Floor and base plates must withstand the impact of 68kg / inch2 load falling from a height of 1m from the floor surface. (Impact Load: 68kg